After starting the diesel engine, it should first run without load for 3-5 minutes, and then gradually accelerate. Only when the diesel engine outlet water temperature is higher than 75 degrees Celsius, the oil temperature is higher than 50 degrees Celsius, and the oil pressure is higher than 2.5 bar are allowed to enter load operation. For diesel engines with a supercharger or for replacing the supercharger, the inlet pump connector of the supercharger must be removed. Wanpeng Power Diesel Generator Set

Wanpeng Power Diesel Generator Set

Add 50 - 60 ML of oil. Prevent supercharger bearings from burning out due to lack of oil during startup. It is generally not allowed to start a diesel engine without an air filter to prevent dust and debris from entering the diesel engine and prevent early wear of the engine. When the diesel engine is running, always observe the diesel engine indicating instrument, and stop the vehicle immediately if any problem is found.

For running diesel engines, pay attention when filling coolant to prevent steam from injuring people. The water tank cover is only allowed to be opened when the water temperature is 70 degrees Celsius. When the diesel engine is stopped, the load switch should be turned off first, and then it should be stopped by running from high speed to low speed for 3 - 5 minutes.

When diesel engines are used in winter, they must be filled with antifreeze, otherwise the user will bear some consequences. When the diesel engine has been filled with diesel, different types of engine oil cannot be mixed. Ordinary units should be guarded by full-time personnel to always observe the operation of the unit and keep operation records. After the unit is shut down, the negative pole of the battery should be disconnected to avoid long-term use, and the battery should be illuminated to prepare for the next start. If you want to know more information about diesel generator sets, you can continue to pay attention to Wanpeng Power.